Galvanized cross 180 F
Thread pipe fitting from malleable cast iron, kind – cross with inner x
inner x inner x inner tubular threads, galvanized design. Inner threads Rc Rc is
conical for sealing of joints on the threads according of norm ISO 7-1. Produced
according of norm EN 10242, mark C1.
Using:
Intended for distribution of water, air, nonabrassive and nonaggressive fluid to allowed press 25 bar and temperature from -20 until 120°C, with necessity of prevention for freezing of media.
180 1/2" Cross galv.
FP18012
49,13 Kč / pcs with VAT
In stock (496 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 3/4" Cross galv.
FP18034
68,85 Kč / pcs with VAT
In stock (0 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 1" Cross galv.
FP1801
93,41 Kč / pcs with VAT
In stock (0 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 5/4" Cross galv.
FP18054
137,58 Kč / pcs with VAT
In stock (262 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 6/4" Cross galv.
FP18064
195,54 Kč / pcs with VAT
In stock (0 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 2" Cross galv.
FP1802
272,86 Kč / pcs with VAT
In stock (65 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 2,5" Cross galv.
FP18025
560,84 Kč / pcs with VAT
In stock (16 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 3" Cross galv.
FP1803
800,17 Kč / pcs with VAT
In stock (39 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
180 4" Cross galv.
FP1804
1 485,28 Kč / pcs with VAT
In stock (11 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
Load more
Loading...