Galvanized reducing bushes 241 MF
Thread pipe fitting from malleable cast iron, kind – reduction (crosseover) with inner x outer tubular threads, galvanized design. Outer thread R and inner thread Rc is conical for sealing of joints on the threads according of norm ISO 7-1. Produced according of norm EN 10242, mark N4.
Using:
Intended for distribution of water, air, nonabrassive and nonaggressive fluid to allowed press 25 bar and temperature from -20 until 120°C, with necessity of prevention for freezing of media.
241 3/8"x1/4" Bushing galv.MF
FP2413814
26,26 Kč / pcs with VAT
In stock (2545 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 1/2"x1/4" Bushing galv.MF
FP2411214
26,26 Kč / pcs with VAT
In stock (477 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 1/2"x3/8" Bushing galv.MF
FP2411238
22,63 Kč / pcs with VAT
In stock (5852 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 3/4"x1/2" Bushing galv.MF
FP2413412
24,08 Kč / pcs with VAT
In stock (42297 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 1"x3/8" Bushing galv.MF
FP241138
54,21 Kč / pcs with VAT
In stock (575 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 1"x1/2" Bushing galv.MF
FP241112
36,06 Kč / pcs with VAT
In stock (16761 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 1"x3/4" Bushing galv.MF
FP241134
36,06 Kč / pcs with VAT
In stock (40089 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 5/4"x1/2" Bushing galv.MF
FP2415412
56,14 Kč / pcs with VAT
In stock (3985 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 5/4"x3/4" Bushing galv.MF
FP2415434
56,14 Kč / pcs with VAT
In stock (15118 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 5/4"x1" Bushing galv.MF
FP241541
56,14 Kč / pcs with VAT
In stock (19837 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 6/4"x1/2" Bushing galv.MF
FP2416412
73,08 Kč / pcs with VAT
In stock (1560 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 6/4"x3/4" Bushing galv.MF
FP2416434
73,08 Kč / pcs with VAT
In stock (2518 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 6/4"x1" Bushing galv.MF
FP241641
70,91 Kč / pcs with VAT
In stock (10628 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 6/4"x5/4" Bushing galv.MF
FP2416454
70,91 Kč / pcs with VAT
In stock (8317 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2"x1/2" Bushing galv.MF
FP241212
104,54 Kč / pcs with VAT
In stock (295 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2"x3/4" Bushing galv.MF
FP241234
104,54 Kč / pcs with VAT
In stock (1163 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2"x1" Bushing galv.MF
FP24121
104,54 Kč / pcs with VAT
In stock (5575 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2"x5/4" Bushing galv.MF
FP241254
104,54 Kč / pcs with VAT
In stock (3433 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2"x6/4" Bushing galv.MF
FP241264
104,54 Kč / pcs with VAT
In stock (6641 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2,5"x1" Bushing galv.MF
FP241251
188,16 Kč / pcs with VAT
In stock (75 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2,5"x5/4" Bushing galv.MF
FP2412554
188,16 Kč / pcs with VAT
In stock (247 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2,5"x6/4" Bushing galv.MF
FP2412564
188,16 Kč / pcs with VAT
In stock (0 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 2,5"x2" Bushing galv.MF
FP241252
188,16 Kč / pcs with VAT
In stock (1596 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 3"x1" Bushing galv.MF
FP24131
272,73 Kč / pcs with VAT
In stock (215 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 3"x5/4" Bushing galv.MF
FP241354
272,73 Kč / pcs with VAT
In stock (209 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 3"x6/4" Bushing galv.MF
FP241364
272,73 Kč / pcs with VAT
In stock (157 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 3"x2" Bushing galv.MF
FP24132
272,73 Kč / pcs with VAT
In stock (698 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 3"x2,5" Bushing galv.MF
FP241325
272,73 Kč / pcs with VAT
In stock (447 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 4"x1" Bushing galv.MF
FP24141
500,46 Kč / pcs with VAT
In stock (53 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 4"x5/4" Bushing galv.MF
FP241454
500,46 Kč / pcs with VAT
In stock (18 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 4"x6/4" Bushing galv.MF
FP241464
500,46 Kč / pcs with VAT
In stock (0 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 4"x2" Bushing galv.MF
FP24142
500,46 Kč / pcs with VAT
In stock (267 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 4"x2,5" Bushing galv.MF
FP241425
500,46 Kč / pcs with VAT
In stock (15 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
241 4"x3" Bushing galv.MF
FP24143
500,46 Kč / pcs with VAT
In stock (171 pcs)Not in stock
Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
Load more
Loading...