Search for
    Search for...
    No products found
    ContactCompare
    User menu

    090 2" STD Elbow FF

    Fittings of brass CW617N. Fittings are specified for joining of threaded according to ISO 228-1. Design: without surface treatment.

    Your price201,71 Kč
    Your price without VAT166,70  Kč
    In stock (264 pcs)Not in stock
    Unit:pcs
    Code 2:031.MMS.090.050
    EAN:
    8592018404397
    Warranty:2 ROKY
    Norms: ČSN EN 10242, ČSN ISO 7-1
    Certificates:
    NewsWe recommend
    4629_MMS090
    4629_MMS090

    Description

    Thread brass fitting, type - elbow 90 ° with pipe threads inner x inner, without surface treatment. Connecting threads G are parallel for join not sealing on threads according ISO 228-1. Produced according EN 1254-4.

    Using:
    Fittings are used to transport water, drinking water, air, non-abrasive and aggressive substances with maximum working pressure of 1.6 MPa at a temperature of fluid from 0 ° C to 120 ° C, medium can not freeze.

    Technical specification

    Atesty

    Hmotnost
    Hmotnost
    0,541

    090 2" Elbow black FF

    FC0902
    101,88  Kč / pcs with VAT
    In stock (1631 pcs)Not in stock
    Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design is black.

    090 2" (60,3mm) Elbow steel

    FOC0902
    65,46  Kč / pcs with VAT
    In stock (1097 pcs)Not in stock
    Fitting of carbon stell S235. Type 3D - Elbow 90°: radius of curvature R≈1,5D. Supplied in black state with thin layer of conservative oil.

    090 2" (57,0mm) Elbow steel

    FOC0902X
    66,31  Kč / pcs with VAT
    In stock (1080 pcs)Not in stock
    Fitting of carbon stell S235. Type 3D - Elbow 90°: radius of curvature R≈1,5D. Supplied in black state with thin layer of conservative oil.

    090 2" Elbow galv. FF

    FP0902
    112,89  Kč / pcs with VAT
    In stock (7422 pcs)Not in stock
    Fitting of malleable cast iron B300-06. Fittings are specified for joining of threaded according to ISO 7-1. Design: galvanized. Zinc coating thickness of 70 microns is generated by hot dip galvanizing
    Login to the newsletter was successful.
    Something is wrong, contact us

    The article has been added to your basket

    Show basket

    Please wait...
    Can't complete order, please try again later